APC United Racing Series

Main Navigation

Official Series Logo
United Racing Series Logo
 
 
 
Announcements
 
 

2023 APC Series Rule Book

By: APC Racing | APC Racing Series | November 11, 2022 at 8:15am
Twitter Facebook Youtube

Attention APC Late Model Teams:

2023 Late Model Rule Book update highlights:

VIEW RULE BOOK HERE

All cars - 79.5 body width - teams were notified in the 2022 rule book All cars - 66-inch track width - teams were notified in the 2022 rule book

MSD ignition boxes ALLOWED - continue to allow MSD ignition boxes for now - Supply issues with other companies

8.1  Front clip and main frame 2”-inch x 3”-inch x .095” minimum. Any tube forward of front control arms maybe 2” inch X 2’ inch x .095” minimum. 

8.2 HIGHLY RECOMMENDED - Rear sub-frame rails 2”X2” X.090” and must extend around fuel cell. (Maybe mandatory in near future)

18.6 NELSON specialist/SRL harness or Quickcar Part Number #50-2053 spec wiring harness HIGHLY RECOMMENDED (Maybe mandatory in the future)

19.8 HIGHLY RECOMMENDED- Fuel cell must be mounted in a minimum structure of 1”x 1” square steel tubing with a minimum thickness of .065” (.000 tolerance). (Maybe mandatory in near future)

19.9 HIGHLY RECOMMENDED-The bottom support frame must be constructed using a minimum of two (2) straps, 1 1⁄2” x 0.125” minimum thick magnetic steel or 1”x 1” square steel tubing with a minimum thickness of .065” (.000 tolerance). These supports must be welded to the fuel cell front and rear cross members. The support straps must extend down the front and rear equally spaced and under the fuel cell container. (Maybe mandatory in near future)

NOTE: No plans to follow five-star recommendations for larger spoiler on GEN 2 car at this point in time.

Please forward all questions to Competition Director

United Racing Series Competition Director
Darryl Timmermans
Dtimmermans38@hotmail.com


Copyright © 2021 United Racing Series